OUR PRODUCTION PROGRAMME
A. INDUSTRIAL FURNACE OIL / GAS FIRED
1. MELTING
(a) Rotary Melting Furnace
(b) Reverberatory (Titling)
(c) Tilting (Crucible)
(d) Bale out
(e) Lift out
(f) Aluminium Copper Melting & Holding Furnaces
2. RE-HEATING
(a) Batch type
(b) Slot type
(c) Pusher type
(d) Rotary Hearth
(e) Walking Beam
3. HEAT TREATMENT
(a) Box type (Under Fired / Side Fired / Over Fired)
(b) Bogie (Botom Car) type
(c) Conveyorised Furnaces for Springs with / without air circulation
(d) Tempering furnace
(e) Push through type for shaft and Axles with / without air circulation
(f) Shaker Hearth
(g) Salt Bath
(h) Double Deck Tool Hardening
4. WIRE INDUSTRY
(a) Annealing
(b) Galvanising
(c) Patenting
(d) Lead Bath
(e) Stress – Relieving
5. OVENS (CORE AND MOULD DRYING)
(a) Bogie type
(b) Drawer type
(c) Room type
(d) Vertical Continuous
B. INDUSTRIAL ELECTRIC FURNACE
1. HEAT TREATMENT
BATCH TYPE
(a) For General Heat treatment upto 10000C
(b) For High speed steel upto 12000C
(c) For Tempering with air circulation
POT TYPE
a) For Tempering with air circulation
b) Salt Bath for Hardening, Tempering, Case Hardening etc. upto 10000C.
CONTINUOUS
a) Conveyorised for hardening Tempering.
b) Roller Hearth type.
c) Pusher type.
2. WIRE INDUSTRY
(a) Annealing
(b) Patening
(c) Galvanising
(d) Lead bath
(e) Stress Relieving
3. DRYING OVENS WITH AIR CIRCULATION
(a) Trolley type
(b) Rack Type
(c) Conveyorised
C. COMBUSTION PACKAGE AND ACCESSORIES :
(1) Burner
(2) Sensitral Oil Value
(3) Burner Block
(4) Air Control Valve
(5) Combustion Blowers, Hot Air Re-circulation Blowers
(6) Oil Pumping Unit (Simplex & Duplex)
(7) Oil Heating & Pumping Unit (Simplex & Duplex)
(8) Oil Pre-Heater
(9) Ladel Pre-Heater
(10) Oil Filter
D. Heating Elements for all type of furnaces and Heating Equipment.
E. Furnace Electric and Process Control Panel.
F. Thermocouples and Compensating cables for Cr / Al., Pt. Pt/Rh (10% & 13%) Copper Constant, Iron Constant etc.
